Year:
Length:
Power:
Hours:
State:
Price:
2001
27'
Single 1000 hp
163
Arizona
$ 65,000
Eliminator Daytona
Description
Eliminator Daytona ( 100 MPH - LOW HOURS )
2001 26 ICC (27') Eliminator Daytona
The power plant is as follows:
Dart Big M standard deck block, Manley stroker 4.25 crankshaft,Scat H-Beam rods, JE blower pistons, internal piston oilers, Brodix BB2 aluminum heads, Comp custom grind blower camshaft (solid roller), Inconel exhaust valves, stainless intake valves, Jesel shaft rocker system, Cometic Head gaskets, Milidon HV oil pump, Dooley 10 qt oil pan, Blower Shop billet 8-71 supercharger, chiller with sea-strainer, Pro-Form 850 carbs,internally balanced, ARP bolts - studs throughout. IMCO exhaust, MSD ignition. This motor is BUILT! I have dyno sheets with over 1000 HP. I have it set up 1:1 on the pulley and run pump gas with 5-6 lbs boost. External oil cooler, 'off-shore' style water pump (runs 120-140 all day long). The boat has 163 hrs on the Hobbs, dual batteries with switch. but I put this motor in a few years ago and has appx 20 hrs.
The drive is an IMCO X-Treme Advantage SC (serviced regularly) with a 4 blade Bravo 1 stainless 28P prop.
This Daytona has 2 45 gallon tanks which will last all weekend if you're gentle.
New 8' Bimini top installed last week.
Sits on an Extreme custom tandom axle trailer, with brakes all the way around. Good tires.
This thing fires right up and runs like a dream. I have done over 100mph with 6 people and a cooler - gear on board. Boat can be faster with a 26p prop.
$65,000
2001 26 ICC (27') Eliminator Daytona
The power plant is as follows:
Dart Big M standard deck block, Manley stroker 4.25 crankshaft,Scat H-Beam rods, JE blower pistons, internal piston oilers, Brodix BB2 aluminum heads, Comp custom grind blower camshaft (solid roller), Inconel exhaust valves, stainless intake valves, Jesel shaft rocker system, Cometic Head gaskets, Milidon HV oil pump, Dooley 10 qt oil pan, Blower Shop billet 8-71 supercharger, chiller with sea-strainer, Pro-Form 850 carbs,internally balanced, ARP bolts - studs throughout. IMCO exhaust, MSD ignition. This motor is BUILT! I have dyno sheets with over 1000 HP. I have it set up 1:1 on the pulley and run pump gas with 5-6 lbs boost. External oil cooler, 'off-shore' style water pump (runs 120-140 all day long). The boat has 163 hrs on the Hobbs, dual batteries with switch. but I put this motor in a few years ago and has appx 20 hrs.
The drive is an IMCO X-Treme Advantage SC (serviced regularly) with a 4 blade Bravo 1 stainless 28P prop.
This Daytona has 2 45 gallon tanks which will last all weekend if you're gentle.
New 8' Bimini top installed last week.
Sits on an Extreme custom tandom axle trailer, with brakes all the way around. Good tires.
This thing fires right up and runs like a dream. I have done over 100mph with 6 people and a cooler - gear on board. Boat can be faster with a 26p prop.
$65,000
Advertisements
Propulsion
Engine
Single
HP
1000 hp
Hours
163
H2O
fresh water
Speed:
Boat Type
Hull Type
Performance Vhull
Hull Material
fiberglass
Options
-
Trailer
-
Stereo
Location
Country:
USA
City:
Phoenix
State:
Arizona
Zip Code:
85254
Eliminator Daytona Photographs
Click on any thumbnail below for a larger photograph, or
View all Photographs Large
View all Photographs Large
This Phoenix AZ Eliminator Daytona 27 Added Sep 27, 2017
The URL for this page is www.powerboatlistings.com/view/50811
The URL for this page is www.powerboatlistings.com/view/50811
-
View QR Code
- Report Listing Cancel Report


















