Chris Craft Commander 268

This vessel was completely disassembled, including all electrical, engines and drive train. Bilge area was inspected and painted, all thru hulls and hoses were replaced, three new bilge pumps were installed one in each bilge area.
Vessel was wired to current ABYC standards including 2500 watt Magnum inverter, ELCI shore power breaker, Charles Isolation Transformer and complete bonding system.
New 330hp MPI Crusader engines and Borg Warner marine gears were installed.
New fuel tanks, dual fuel filter system and Maretron fuel tank senders were installed and connected to NMEA 2000 network.
Dual start, house - inverter batteries with isolation switches.
Completely new Garmin 7200 series chart plotters at both stations with radar, VHF and class B AIS system.
Interior was completely removed, custom helm chair was built along with extra seating. Interior was constructed to maximize storage, stainless grab rails were installed to insure safety.
Vessel was just hauled 2 months ago, bottom was painted and all anodes were replaced.

Owner invested $250,000 in this vessel restoration.