Cutter Expedition Yacht 110

Length: 33.5m - 110ft and a
Beam: 06.04m - 21ft
Draft: 02.02m - 6.38ft.
Displacement of: 165 tons
The cutter is powered by low hour 2012 newly installed twin caterpillar diesel engines affording a maximum speed of 29.5 to 33 knots and a range of 3,300 nautical miles @ 12 knots.
Vessel will operate @ 12 knots on one engine this practice is common.
Vessel can operate QUITE SHIP due to Exhaust mods.

Works Completed in 2012 @ a cost of: $2,700,000.00:

New Engines: Caterpillar 3516 V-16 Twin turbo (3,530 hours of use since rectification of Caterpillar)
New Propeller Shafts
Strut bearings and shaft bearings as needed
New Water Tanks
Vessel completely Rewired
Bigger water pumps for the main engines
Haul out and bottom treated 9 year remaining CARPAC CATODIC SYSTEM
Propellers Re-pitched and conditioned
Hull plates Auto-gaged found in very good condition
New 20 mm Canon mounting brackets

Full exterior painting and boot stripe was done in: latter part of 2014
New mooring lines and fenders

Hydrodynamic Efficiency Improvements completed to this vessel. - (File available)