Powerboat Listings
Classified Ads   Power Boat
Home High Performance Boats
Powerboat Listings
Access Agreement
Privacy Policy


AllSeas powerboats for sale by owner.
Your search returned 2 matches.

92' AllSeas 92

2017 National City California 92 AllSeas 92
HULL # 2 INCORPORATES MANY UPGRADES AND IMPROVEMENTS ON THE ORIGINAL DESIGN. THE HULL AND STRICTURES ARE THE SAME AS HEAVENS GATE, HULL #1. Allseas Yachts was founded by Benny Alls, an old timer in steel boat manufacturing. Benny began his career in boat building in 1975 and began building steel commercial fishing boats from 48 feet to 100 feet in length. He trained his son, Tim Alls, and the two of them were soon building some of the most rugged steel commercial boats on the market. Their clients needed boats that could endure the extreme weather of Alaska and the Bering sea. The hulls needed to be tough enough to handle occasional rocks as well as large logs in the water. Stability was a huge factor so that these boats could fish in rough weather which was so common in Southeast Alaska. Benny and Tim learned by experience the thickness of glass and window spacing's required to survive 75 foot waves that fishermen sometimes come upon unexpectedly. With Bennys experience in building tough steel hulls and Tims experience in the hi-tech industry an unusual balance was achieved between old school thinking and new school technology. ​ THE HULL: It starts at the bottom of the boat with a 110 pound keel that separates you from the rocks.....12 by 12 by 1 1 - 4 inch steel I beam. Notice the skegs under our propellers, 2 1 - 2 solid steel that protects the props and supports the rudders. On most boats the props are totally exposed and logs can wipe them out not to mention bumping into a rock! We turn 58 inch props as slow as possible.....that's the equation for less fuel burned. We typically use 15 gallons per hour running two engines and a generator....not bad for a 175 ton Expedition Yacht. ​ The Hulls are built to exceed commercial class ABS ratings....They can easily plow through light ice conditions with their 1 inch thick stem piece and 3 - 8 thick steel bottoms.....look at the framing of these boats....48 inch centered frames with longitudinals every 12 inches.....just like the fishing boats we used to build. The pilot house and rigging is all aluminum to keep the center of gravity low on the vessel. The hull passes a damage stability test and has been incline tested to carry 10,000 pounds of toys on the boat deck. The deck crane is a telescoping 10,000 pound capacity with a hand held remote control. ​ ANCHORING SYSTEM: A 9 inch Hydraulic Bow and Stern thruster for easy docking... with steel guards for protection from logs. We have a bow and stern anchor winch....not a Capstan and chain locker. The secret to anchoring is in the layering of the chain. We start with a 350 pound anchor hooked to 90 feet of galvanized chain followed by 200 feet of 1 - 2 inch high tensile chain followed by 300 feet of steel cable. This can only be done on a drum....it is faster and safer than a capstan. With the long scope and the heavy chain hooked to the anchor you will hold fast even in the worst conditions. A true Long Range Expedition Yacht made to the its' owner, family and guests to the ends of the earth in comfort. THIS IS A NEW BUILD, NEVER BEEN REGISTERED. Here are the changes incorporated in Hull # 2 that were not in Heavens Gate, Hull #1: Sea Fire Fire Suppression System 25 kw Night-time Generator Set C18 Caterpillar Marine Engines Quantum 0 Speed Stabilizers & Hydraulics HVAC (4) 4 Ton Compressors with Frequency Drives Atlas Inverter 100 Amp Atlas Power Breaker & Switchgear Enclosed Delta-T Fans Sound Enclosures Computer Monitoring with Touch Screen & 5 Monitors New Design 20,000 gallons per hour Manifold Bilge System Engine Room is Aft to New Crew Quarters Crew Quarters Include Double Lower Bunks Single Upper Bunk Crew Quarters can Accommodate 2-4 Crew Laundry Storage Center and Folding Station under Stairs across Hall from Washer & Dryer Compact Laundry Center in Lazarette. Located in National City California.
Year: 2017  Power: Twin 600 hp (each)   Location: California  Contact Number: 954 870 3667  Asking: $11,250,000  Details & Photos  


92' AllSeas Expedition Yachts 92 92

2010 Ft Lauderdale FL Florida 92 AllSeas Expedition Yachts 92 92
Allseas Yachts was founded by Benny Alls, an old timer in steel boat manufacturing. Benny began his career in boat building in 1975 and began building steel commercial fishing boats from 48 feet to 100 feet in length. He trained his son, Tim Alls, and the two of them were soon building some of the most rugged steel commercial boats on the market. Their clients needed boats that could endure the extreme weather of Alaska and the Bering sea. The hulls needed to be tough enough to handle occasional rocks as well as large logs in the water. Stability was a huge factor so that these boats could fish in rough weather which was so common in Southeast Alaska. Benny and Tim learned by experience the thickness of glass and window spacing's required to survive 75 foot waves that fishermen sometimes come upon unexpectedly. With Bennys experience in building tough steel hulls and Tims experience in the hi-tech industry an unusual balance was achieved between old school thinking and new school technology. ​ THE HULL: It starts at the bottom of the boat with a 110 pound keel that separates you from the rocks.....12 by 12 by 1 1 - 4 inch steel I beam. Notice the skegs under our propellers, 2 1 - 2 solid steel that protects the props and supports the rudders. On most boats the props are totally exposed and logs can wipe them out not to mention bumping into a rock! We turn 58 inch props as slow as possible.....that's the equation for less fuel burned. We typically use 15 gallons per hour running two engines and a generator....not bad for a 175 ton Expedition Yacht. ​ The Hulls are built to exceed commercial class ABS ratings....They can easily plow through light ice conditions with their 1 inch thick stem piece and 3 - 8 thick steel bottoms.....look at the framing of these boats....48 inch centered frames with longitudinals every 12 inches.....just like the fishing boats we used to build. The pilot house and rigging is all aluminum to keep the center of gravity low on the vessel. The hull passes a damage stability test and has been incline tested to carry 10,000 pounds of toys on the boat deck. The deck crane is a telescoping 10,000 pound capacity with a hand held remote control. ​ ANCHORING SYSTEM: Heavens Gate has a 9 inch Hydraulic Bow and Stern thruster for easy docking... with steel guards for protection from logs. We have a bow and stern anchor winch....not a Capstan and chain locker. The secret to anchoring is in the layering of the chain. We start with a 350 pound anchor hooked to 90 feet of galvanized chain followed by 200 feet of 1 - 2 inch high tensile chain followed by 300 feet of steel cable. This can only be done on a drum....it is faster and safer than a capstan. With the long scope and the heavy chain hooked to the anchor you will hold fast even in the worst conditions. Heaens Gate is a true Long Range Expedition Yacht made to the its' owner, family and guests to the ends of the earth in comfort. Boat Name Heavens Gate Specs Builder: Allseas Yachts Designer: Tim Alls Flag of Registry: United States Dimensions LOA: 92 ft 0 in Beam: 24 ft 6 in Maximum Draft: 6 ft 6 in Displacement: 370000 lbs Full Load Engines Engine 1: Engine Brand: Cummins Year Built: 2010 Engine Model: KTA19-M3 Engine Type: Inboard Engine - Fuel Type: Diesel Location: Starboard Engine Hours: 1800 Drive Type: Direct Drive Engine Power: 600 HP Engine 2: Engine Brand: Cummins Year Built: 2010 Engine Model: KTA19-M3 Engine Type: Inboard Engine - Fuel Type: Diesel Location: Port Engine Hours: 1800 Drive Type: Direct Drive Engine Power: 600 HP Tanks Fresh Water Tanks: (1000 Gallons) Fuel Tanks: (7000 Gallons) Holding Tanks: (900 Gallons) Accommodations Number of cabins: 6 Number of heads: 7 Outside Equipment - Extras Hydraulic windlass. Located in Ft Lauderdale FL Florida.
Year: 2010  Power: Twin 600 hp (each)   Location: Florida  Contact Number: 954 870 3667  Asking: $7,495,000  Details & Photos  


Show powerboats under:  25  30  35  40  45  50  60  70  feet 
Show powerboats over:  20  30  40  feet  Show All







Cigarette

Cigarette
Apache

Apache
Douglas Marine Skater

Skater
Donzi

Donzi
Fountain

Fountain
Formula

Formula
Spectre

Spectre
DCB

DCB
Baja

Baja
Hustler

Hustler
Nor-Tech

Nor-Tech
MTI

MTI
Outerlimits

Outerlimits
Sunsation

Sunsation
Sonic

Sonic
Sutphen

Sutphen
Velocity

Velocity
Wellcraft

Wellcraft
 Copyright © 2001-2017
 Boat Design Net
  Show Powerboats Located In: Alabama | Alaska | Arizona | Arkansas | California | Colorado | Connecticut | Delaware | Florida | Georgia | Idaho | Illinois | Indiana | Iowa | Kansas | Kentucky | Louisiana | Maine | Maryland | Massachusetts | Michigan | Minnesota | Mississippi | Missouri | Montana | Nebraska | Nevada | New Hampshire | New Jersey | New Mexico | New York | North Carolina | Ohio | Oklahoma | Oregon | Pennsylvania | Rhode Island | South Carolina | Tennessee | Texas | Utah | Vermont | Virginia | Washington | West Virginia | Wisconsin | Wyoming  
Site Access Agreement 
Terms of Use - Cookies 
Privacy Policy